how to remove a burred screw - Redraw

Understanding the Context

What Causes a Burred Screw?

A burred screw typically forms when the screw head is stripped due to improper tool size, excessive force, or wear over repeated removal attempts. The irregular ridges occur when the tool slips, wears down, or applies uneven pressure. Recognizing what caused the burr helps you prevent future problems.

Tools You’ll Need

Key Insights

Before diving in, gather these essential tools to make the process smoother:

• Phillips or Slovak bit (drill bit matching the screw type)
  
• Small flathead screwdriver (flat and angular, depending on screw shape)
  
• Needle-nose pliers
  
• Pencil or marker (for marking the center)
  
• Low-speed power drill (optional, for drilling out the burr)
  
• Fresh, properly sized bit
  
• Lubricant (like penetrating oil or WD-40)
  
• Protective gloves and eye gear (for safety)

Step-by-Step Guide to Removing a Burred Screw

Step 1: Prepare the Area

Secure the workpiece firmly to prevent movement. For furniture or delicate items, use a clamp to hold the surface. Put on gloves and safety glasses to protect yourself from flying debris or slipping tools.

Final Thoughts

Step 2: Identify the Screw Type

Determine whether it’s a Phillips or Slovak screw. Use a vintage bit or inspect the slot for markings. This ensures you use the correct driving tip or insertion tool—critical to avoid further stripping.

Step 3: Apply Penetrating Oil

Spray penetrating oil liberally into the screw head and surrounding area. Let it sit for 10–15 minutes to loosen corrosion or cross-threading that may be stuck.

Step 4: Use Precision Tools for Access

If the screwdriver slips, start with a thin flathead or angled blunt tip to gain better grip. Insert carefully into the raised ridge, rocking gently to bypass the burr before full removal.

Step 5: Drill a Pilot Hole (Optional)

Using a small, sharp-tipped low-speed drill bit, carefully drill a pilot hole straight into the center. Apply light pressure—this avoids additional damage and creates a clean channel for tool insertion.

Step 6: Insert a Proper Tool or Transgrass

If rocking doesn’t work, use a small punch or a small round bit slightly smaller than the screw shank to stabilize rotation. Alternatively, a small metal transgrass tool or custom drill bit designed for broken screws can help circumvent the burr.

Step 7: Remove Gently with the Correct Tool

Once stabilized, apply steady, incremental pressure with your chosen insert tool. Avoid excessive force—rotate slowly while applying constant pressure. Wipe away debris frequently to maintain tool contact.